CNC TAKANG-Heavy Duty Lathe- CNC-TAKANG CO., LTD.

DCMS Series

MODEL	DESCRIPTION	DCMS-2023	DCMS-3023	DCMS-4023
Table	Working surface	2200mm x 2050mm (86.6"x80.7")	3200mm x 2050mm (125.9"x80.7")	4200mmx2050mm (165.3"x80.7")
	T-slot (size x number x pitch)	28mm x 11 x 180mm (1.1"x11x7")
	Max. table load	8000kgs	10000kgs	13000kgs
Travel	Longitudinal trave (X axis)	2200mm (86.6")	3200mm (125.9")	4200mm (165.3")
	Cross travel (Y axis)	2300mm (90.5")
	Vertical travel (Z axis)	920mm (36.2")
	Distance from spindle end to table	150mm~1070mm (5.9"~42.1")
	Distance from spindle center to column	390mm (15.3")
	Distance between column	2400mm (94.4")
Spindle	Spindle drive motor (Con. / 30min)	18.5kw / 22kw
	Spindle speed (Gear)	50~4500 / 6000 rpm (OPT.)
	Spindle speed (Belt)	50~8000 rpm / 10000 rpm (OPT.)
	Spindle taper	ISO50
Feed	Cutting feedrate	1-7000 mm/min
	Rapid traverse (X/Y/Z)	12/12/12 M/min		10/12/12 M/min
	Axis motor (X/Y/Z)	7/7/4.5 kw
Atc	Tool storage capactiry	40 / 60 (OPT.)
	Max. tool weight	18 kgs
	Tool size (full tools)	Ø125mm(4.9") x 450L
	Max. tool size (next pocket empty)	Ø215mm(8.4") x 450L
	Tool shank	BT50/ CAT50
	Pull stud bolt	P50T-1
Micsellaneous	Power requirement	60KVA
	Pneumatic requirement	6kgs / cm², 90 NL
	Gross weight	32000kgs	37100kgs	43400kgs
	Machine size (LxWxH)	8000x6100x4700mm 314.9x240.1x185"	10000x6100x4700mm 393.7x240.1x185"	12000x6100x 4700mm 472.4x240.1 x185"

MODEL	DESCRIPTION	DCMS-5023	DCMS-6023	DCMS-4026
Table	Working surface	5200x2050mm (204.7"x80.7")	6200mm x 2050mm (244"x80.7")	4200mmx2050mm (165.3"x80.7")
	T-slot (size x number x pitch)	28mm x 11 x 180mm (1.1"x11x7")
	Max. table load	15000kgs	18000kgs	13000kgs
Travel	Longitudinal trave (X axis)	5200mm(204.7")	6000mm(236.2")	4200mm (165.3")
	Cross travel (Y axis)	2300mm (90.5")		2600mm(102.3")
	Vertical travel (Z axis)	920mm (36.2")
	Distance from spindle end to table	150mm~1070mm (5.9"~42.1")
	Distance from spindle center to column	390mm (15.3")
	Distance between column	2400mm (94.4")		2700mm (106.2")
Spindle	Spindle drive motor (Con. / 30min)	18.5kw / 22kw
	Spindle speed (Gear)	50~4500 / 6000 rpm (OPT.)
	Spindle speed (Belt)	50~8000 rpm / 10000 rpm (OPT.)
	Spindle taper	ISO50
Feed	Cutting feedrate	1-7000 mm/min
	Rapid traverse (X/Y/Z)	10/12/12 M/min	8/12/12 M/min	10/12/12 M/min
	Axis motor (X/Y/Z)	7/7/4.5 kw	9/7/4.5 kw	7/7/4.5 kw
Atc	Tool storage capactiry	40 / 60 (OPT.)
	Max. tool weight	18 kgs
	Tool size (full tools)	Ø125mm(4.9") x 450L
	Max. tool size (next pocket empty)	Ø215mm(8.4") x 450L
	Tool shank	BT50/ CAT50
	Pull stud bolt	P50T-1
Micsellaneous	Power requirement	60KVA
	Pneumatic requirement	6kgs / cm², 90 NL
	Gross weight	48400kgs	53000kgs	46400kgs
	Machine size (LxWxH)	14000x6100x4700mm 551.1x240.1x185"	16000x6100x4700mm 629.9x240.1x185"	12000x6400x 4700mm 472.4x251.9x185"

MODEL	DESCRIPTION	DCMS-5026	DCMS-6026
Table	Working surface	5200mm x 2050mm (204.7"x80.7")	6200mm x 2050mm (244"x80.7")
	T-slot (size x number x pitch)	28mm x 11 x 180mm (1.1"x11x7")
	Max. table load	15000kgs	18000kgs
Travel	Longitudinal trave (X axis)	5200mm (204.7")	6000mm (236.2")
	Cross travel (Y axis)	2600mm(102.3")
	Vertical travel (Z axis)	920mm (36.2")
	Distance from spindle end to table	150mm~1070mm (5.9"~42.1")
	Distance from spindle center to column	390mm (15.3")
	Distance between column	2700mm (106.2")
Spindle	Spindle drive motor (Con. / 30min)	18.5kw / 22kw
	Spindle speed (Gear)	50~4500 / 6000 rpm (OPT.)
	Spindle speed (Belt)	50~8000 rpm / 10000 rpm (OPT.)
	Spindle taper	ISO50
Feed	Cutting feedrate	1-7000 mm/min
	Rapid traverse (X/Y/Z)	10/12/12 M/min	8/12/12 M/min
	Axis motor (X/Y/Z)	7/7/4.5 kw	9/7/4.5 kw
Atc	Tool storage capactiry	40 / 60 (OPT.)
	Max. tool weight	18 kgs
	Tool size (full tools)	Ø125mm(4.9") x 450L
	Max. tool size (next pocket empty)	Ø215mm(8.4") x 450L
	Tool shank	BT50/ CAT50
	Pull stud bolt	P50T-1
Micsellaneous	Power requirement	60KVA
	Pneumatic requirement	6kgs / cm², 90 NL
	Gross weight	51400kgs	56000kgs
	Machine size (LxWxH)	14000x6400x4700mm 551.1x251.9x185"	16000x6400x4700mm 629.9x251.9x185"

‧The design & specifications are subject to change without prior notice.

STANDARD ACCESSORIES:
1.	Auto power off
2.	Auto lubrication system
3.	Full splash guard
4.	Work light
5.	Air blast through spindle
6.	RS-232 interface
7.	Coolant system
8.	Heat exchanger for electrical cabinet
9.	Remote manual pulse generator
10.	Screw type and chain type chip conveyor
11.	Spindle chiller
12.	Leveling bolts & blocks
13.	Tool box with tools
14.	Operation manual & electric diagram

OPTIONS:
1.	Coolant through spindle
2.	Coolant through tool holder
3.	Mist coolant system
4.	Oil skimmer
5.	Spindle 6000rpm (Gear type)
6.	Spindle 10000rpm (Belt type)
7.	Closed-loop linear scales
8.	XYZ axes ballscrew with oil chilling system
9.	Manual 90 degree angle head
10.	Manual universal head
11.	Automatic tool length measurement
12.	Automatic coordinate measurement
13.	4th axis preparation
14.	40 tools ATC for DCM / 60 tools ATC for DCMS