 |
|
 |
 |
 --------------Flat
Bed / LA
Series |
 |
| MODEL |
DESCRIPTION |
LA 26 |
| Capacity |
Swing over bed |
Ø660mm (26") |
| Swing over cross slide |
Ø370mm (14.5") |
| Center height |
330mm (13") |
| Distance between centers |
1520mm (60"), 2030mm (80"), 3050mm (120") |
| Bed width |
480mm (18.9") |
| Spindle |
Spindle bore,
nose and
speed range |
| A2-11 (4") |
| L2: 25~75 rpm |
| L1: 76~165 rpm |
| H2: 166~540 rpm |
| H1: 541~1200 rpm |
|
| Spindle center |
MT5 |
| Width of cross slide |
280mm (11") |
| Turret |
Turret |
H4-250 or V8 Hydraulic |
| Tool Size |
H4 25x25 or V8 25x25 |
| X axis travel |
400mm (15.7") |
| Z axis travel |
1380mm(54"), 1890mm(74"), 2910mm(115") |
| X axis rapid travel |
5M / min Ø32*p5 |
| Z axis rapid travel |
10M / min Ø50*p10 |
| Tailstock |
Tailstock quill diameter |
Ø 105mm(4.1"), Opt Rotating quill |
| Tailstock quill travel |
200 mm (8") |
| Tailstock center |
MT6 |
| Motor |
X axis servo motor |
FANUC α8i 1.6kw |
| Z axis servo motor |
FANUC α12i 3.0kw |
| Spindle motor |
FANUC α15i 15/18.5kw |
| Lubricant pump motor |
25W |
| Coolant pump motor |
0.455HP |
| Hydraulic pump motor |
1kw |
| Machine Weight |
1500mm center distance |
6000kgs |
| Each extra 500mm weight |
500kgs |
| ‧The design & specifications are subject to change without prior notice. |
|
| MODEL |
DESCRIPTION |
LA 30 |
LA 35 |
| Capacity |
Swing over bed |
Ø770mm (30") |
Ø890mm (35") |
| Swing over cross slide |
Ø480mm (18.9") |
Ø600mm (23.6") |
| Center height |
385mm (15.1") |
445mm (17.5") |
| Distance between centers |
1520mm (60"), 2030mm (80"), 3050mm (120") |
| Bed width |
480mm (18.9") |
| Spindle |
Spindle bore,
nose and
speed range |
| A2-11 (4") |
A2-11(4") |
A2-15 (9") |
| L2: 25~75 rpm |
25~53 rpm |
13~42 rpm |
| L1: 76~165 rpm |
51~118 rpm |
36~123 rpm |
| H2: 166~540 rpm |
119~386 rpm |
106~240 rpm |
| H1: 541~1200 rpm |
387~860 rpm |
215~700 rpm |
|
| Spindle center |
MT5 |
| Width of cross slide |
280mm (11") |
| Turret |
Turret |
H4-250 or V8 Hydraulic |
| Tool Size |
H4 25x25 or V8 25x25 |
| X axis travel |
400mm (15.7") |
| Z axis travel |
1380mm(54"), 1890mm(74"), 2910mm(115") |
| X axis rapid travel |
5M / min Ø32*p5 |
| Z axis rapid travel |
10M / min Ø50*p10 |
| Tailstock |
Tailstock quill diameter |
Ø 105mm(4.1"), Opt Rotating quill |
| Tailstock quill travel |
200 mm (8") |
| Tailstock center |
MT6 |
| Motor |
X axis servo motor |
FANUC α8i 1.6kw |
| Z axis servo motor |
FANUC α12i 3.0kw |
| Spindle motor |
FANUC α15i 15/18.5kw |
| Lubricant pump motor |
25W |
| Coolant pump motor |
0.455HP |
| Hydraulic pump motor |
1kw |
| Machine Weight |
1500mm center distance |
6250kgs |
6750kgs |
| Each extra 500mm weight |
500kgs |
| ‧The design & specifications are subject to change without prior notice. |
|
| STANDARD ACCESSORIES: |
| 1. |
Main motor and electrical box |
| 2. |
Main spindle center MT 5 |
| 3. |
Manaul tailstock |
| 4. |
Tailstock center MT6 |
| 5. |
Work light |
| 6. |
Auto-lubrication, Coolant and Hydralic system |
| 7. |
Hyd. 4 or 8 stations turret |
|
| OPTIONS: |
| 1. |
Hyd. Steady rest |
| 2. |
Hyd. Follow rest |
| 3. |
Manual steady rest, cap. 50-370mm (for LA26, LA30)
Manual steady rest, cap. 70-420mm (for LA35) |
| 4. |
Manual follow rest, cap. 10-120mm |
| 5. |
Rear tool post |
| 6. |
Hydraulic tailstock |
| 7. |
Chip conveyor |
| 8. |
Tailstock movable by motor & rack |
| 9. |
Spindle oil chiller unit |
| 10. |
Transformer |
| 11. |
Bigger spindle bore (6" or 9") |
|
|
|
 |
 |
