 |
|
 |
 |
 --------------Flat
Bed / LB
Series |
| FEATURES: |
| 1. |
Full torque output at 11rpm spindle speed |
| 2. |
Soild box-construction casting headstock |
| 3. |
Spindle speed ranges are auto changed by M code |
| 4. |
Infinitely variable speeds are commanded by S code |
| 5. |
Z axis transmission at the center of saddle, with speed reducer for extra torque output |
| 6. |
Extra wide saddle, super rigidity for interrupt and heavy truning |
| 7. |
Extra wide chip evacuate space for easier chip removal |
| 8. |
Multi function turret and tool holder for various disk parts machining |
| 9. |
Specialized design for oil pipes & other oil industry components turning |
|
LB Series
|
SPECIFICATIONS
|
MODEL |
|
|
Capacity |
Swing over Bed |
1000mm (39.3") |
Center height |
520 mm (20.4") |
Bed width |
600mm (23.6") |
Spindle |
Spindle nose |
A2-11(6") A2-15(9") A2-20(12")
A2-20(14.5") |
| Spindle speeds |
11-600rpm 11-450rpm 11-400rpm
11-300rpm |
| Spindle center |
MT6 |
| Width of cross slide |
450mm (17.7") |
wIdth of carriage |
885mm (34.8") |
Turret |
Turret |
H6,H8-450 servo or H4-350 Hydraulic |
Tool size |
32x32 mm (1.25"x1.25") |
X axis Travel |
630mm (25") |
Z axis Travel |
1360mm (53.5") |
X axis rapid travel |
6M
/ min (Ø40mm * p5) |
Z axis rapid travel |
6M / min (Ø 50mm * p10) |
Motor |
X axis servo motor |
FANUC α22ì 4kw |
Z axis servo motor |
FANUC α22ì 4kw |
Spindle motor |
Fanuc α18i 18.5 / 22kw
(Opt. α30i 30 / 37kw,α22i 22 / 26kw) |
Lubricant pump motor |
25w |
Coolant pump motor |
0.845kw |
Hydraulic pump motor |
2.25kw |
| Machine Weight |
|
10500kgs |
|
‧The specifications are subject to
change without prior notice. |
| STANDARD ACCESSORIES: |
| 1. |
Fanuc control, motor & 6" spindle bore |
| 2. |
H4 or V6 or V8 turret |
| 3. |
Center, MT6 for spindle & tailstock |
| 4. |
Auto coolant, hydraulic & lubrication system |
| 5. |
Box way on cross slide |
| 6. |
Splash guard |
| 7. |
Work light |
| 8. |
Chain type chip conveyor |
| 9. |
Tool box with tools |
| 10. |
Manual |
|
| OPTIONS: |
| 1. |
Extra spindle bore, motor & speeds |
| 2. |
Spindle oil chiller |
| 3. |
Chucks, Rear chuck adapter & Face plate |
| 4. |
C axis or Spindle 5° indexing or 15° orientation |
| 5. |
Driving tool turret |
| 6. |
Driving toolholders |
| 7. |
Special boring bar toolholder |
| 8. |
Higher coolant pressure |
| 9. |
Tool presetter |
| 10. |
Other controller |
| 11. |
Steady rest |
| 12. |
Heavy duty milling attachment |
| 13. |
Transformer (power supply except 220v) |
| 14. |
CE mark |
|
|
|
 |
 |
