 |
|
 |
 |
 --------------Flat
Bed / LC/LD
Series |
| FEATURES: |
| 1. |
Solid box-construction casting headstock |
| 2. |
Spindle speed ranges are auto changed by M code |
| 3. |
Infinitely variable speeds are commanded by S code |
| 4. |
Three (3) "V" bedways for better rigidity |
|
LC/LD Series
|
SPECIFICATIONS
|
MODEL |
|
|
|
|
Capacity |
Swing over Bed |
770mm (30") |
895mm (35") |
1020mm (40") |
Swing over cross slide |
350 mm (13.8") |
480 mm (18.9") |
610 mm (24") |
Center height |
390 mm (15.3") |
455 mm (18") |
520 mm (20.5") |
Distance between centers |
1200 / 2200 / 3200 / 4200 / 5200 / 6200mm |
(47.2") / (86.6") / (126") / (165.4") / (204.7") / (244.1") |
Bed width / Auxiliary guide |
560 mm (22") |
Spindle |
Spindle
speeds |
Spindle nose |
|
A2-11(6") |
11~600 rpm ( Opt. 15~800 rpm) |
A2-15(9") |
11~450 rpm ( Opt. 15~600 rpm) |
A2-20
(12",14.5") |
--
| 11~400 rpm |
Spindle center |
MT6 |
Width of cross slide |
380 mm (15") |
Width of carriage |
885 mm (34.8") |
Turret |
Turret |
H4-250 or V8 Hydraulic |
Tool size |
H4 32x32 or V8 32x32 ; Ø50 |
X axis Travel |
530mm (20.9") |
Z axis Travel |
1200 mm (47.2") ~ 6200mm (244.1") |
X axis rapid travel,
Ball screw dia. |
6M
/ min Ø40mm * p5 |
Z axis rapid travel,
Ball screw dia. |
6M / min, 1M~5M (Ø 63mm * p10),
6~8M (Ø 80mm * p10) |
Tailstock |
Quill diameter |
Ø 185
mm (7.3") Rotating quill. Opt: Ø250 mm (9.8") |
Quill travel |
250 mm (9.84") |
Quill taper |
MT6 |
Motor |
X axis servo motor |
FANUC α22ì 4kw |
Z axis servo motor |
1~4M FANUC α22ì 4kw, 5~8M FANUC α30ì 7kw, 4~8M Gear Box |
Spindle motor |
FANUC α18i 18.5/22kw |
Lubricant pump motor |
25W |
Coolant pump motor |
0.845kw |
Hydraulic pump motor |
2.25kw |
| Machine Weight |
1000mm center distance |
9700kgs |
10100kgs |
10500kgs |
| Each extra 1000mm weight |
1000kgs |
|
‧The specifications are subject to
change without prior notice. |
| ------------------------------------------------------------------------------ |
 |
MODEL |
DESCRIPTION |
LD 45 |
LD 50 |
LD 55 |
LD 60 |
| Capacity |
Swing over Bed |
1135mm (45") |
1265mm (50") |
1395mm (55") |
1520mm
(60") |
Swing over cross slide |
720mm (28.3") |
850 mm (33.5") |
980mm (38.6") |
1110mm (43.7") |
Center height |
585 mm (23") |
650 mm (25.6") |
715 mm
(28.1 ") |
780 mm (30.7") |
Distance between centers |
1150/ 2150/ 3150/ 4150/ 5150/ 6150/ 7150/ 8150mm |
(45.3") / (84.6") / (124") / (163.4") / (202.8") / (242.1") / (281.5") / (321") |
Bed width / Auxiliary guide |
700 mm (27.56") / 850 mm (33.5") |
| Spindle |
Spindle
speeds |
Spindle nose |
|
A2-11(6") |
9~600 rpm ( Opt. 12~800 rpm) |
A2-15(9") |
9~450 rpm ( Opt. 12~600 rpm) |
A2-20
(12",14.5") |
9~400 rpm |
A2-28(16") |
-- |
6~250 rpm |
A2-28(21") |
-- |
6~220 rpm |
Spindle center |
MT6 |
Width of cross slide |
420 mm (16.5") |
Width of carriage |
950 mm (37.4") |
| Turret |
Turret |
H4-350 or V8 Hydraulic |
Tool size |
H4 32x32 or V8 32x32 ; Ø50 |
X axis Travel |
730mm (28.7") |
Z axis Travel |
1050 mm (41.3") ~ 8050 mm (317") |
X axis rapid travel,
Ball screw dia. |
6M
/ min Ø40mm * p5 |
Z axis rapid travel,
Ball screw dia. |
6M / min, 1M~5M (Ø 63mm * p10),
6~8M (Ø 80mm * p10) |
| Tailstock |
Quill diameter |
Ø 185
mm (7.3") Rotating quill Opt: Ø250 mm (9.8") |
Quill travel |
250 mm (9.84") |
Quill taper |
MT6 |
| Motor |
X axis servo motor |
FANUC α22ì 4kw |
Z axis servo motor |
1~4M FANUC α22ì 4kw, 5~8M FANUC α30ì 7kw,
4~8M Gear Box |
Spindle motor |
FANUC α22i 22/26kw |
Lubricant pump motor |
25W |
Coolant pump motor |
0.845kw |
Hydraulic pump motor |
2.25kw |
| Machine Weight |
1000mm center distance |
16400kgs |
17000kgs |
17600kgs |
18200kgs |
| Each extra 1000mm weight |
1500kgs |
| ‧The specifications are subject to change without prior notice |
|
| STANDARD ACCESSORIES: |
| 1. |
Fanuc control, motor & 6" spindle bore |
| 2. |
H4 or V8 hydraulic turret |
| 3. |
Auto coolant, hydraulic & lubrication system |
| 4. |
Box way on cross slide |
| 5. |
Splash guard |
| 6. |
Center, MT6 for spindle & tailstock |
| 7. |
Work light |
| 8. |
Hydraulic tailstock with rotating quill |
| 9. |
Tool box with tools |
| 10. |
Chip conveyors (auger for front & chain for rear) |
|
| OPTIONS: |
| 1. |
Extra spindle bore, motor & speeds |
| 2. |
Spindle oil chiller |
| 3. |
Chucks, Rear chuck adapter & Face plate |
| 4. |
C axis or Spindle 5° indexing or 15° orientation |
| 5. |
Driving tool turret |
| 6. |
Driving toolholders |
| 7. |
Special boring bar toolholder |
| 8. |
Higher coolant pressure |
| 9. |
Twin turret (V8 front +H4 rear) |
| 10. |
Tool presetter |
| 11. |
Other controller |
| 12. |
Steady rest & follow rest (Capacity, Hydraulic or Manual) |
| 13. |
Steady rest with cutting pass through equipment |
| 14. |
Heavy duty milling attachment |
| 15. |
Y axis (with heavy duty milling attachment) |
| 16. |
Grinding head on turret or cross slide |
| 17. |
Chain type chip conveyor for front |
| 18. |
Extra tailstock quill dia. 250mm (A2-8) |
| 19. |
Transformer (power supply except 220V) |
| 20. |
CE mark |
|
|
|
 |
 |
