 |
|
 |
 |
 High Speed Precision Lathe |
|
| FEATURES: |
| 1. |
Better design on headstock |
| 2. |
Wider teeth of gear sets on headstock |
| 3. |
Dual gear box |
|
| MODEL |
TK600 |
TK670 |
| CAPACITY |
| Swing over bed |
600mm (23.6") |
670mm (26.3") |
| Swing over cross slide |
390mm (15.3") |
460mm (18.1") |
| Swing over gap |
820mm (32.2") |
890mm (35") |
| Gap width from spindle nose |
460mm (18.1") |
| Between centers |
1500mm (59") , 2000mm (78") , 3000mm (118")
4000mm (157") , 5000mm (196") |
| HEADSTOCK |
| Spindle bore,dia. |
80mm (3.1")
[Opt.Ø104mm (4") ] |
Ø104mm (4")
[ Opt.Ø156mm (6")
A2-11,Ø230mm (9") A2-15 ]
|
| Spindle nose (Camlock) |
D1-8(Opt.D1-11orA-11) |
D1-11orA-11 |
| Spindle speeds, RPM, steps |
17-1200, 12
(Opt.15-1000, 12) |
15-1000,12
[ Opt. (6"bore:13-800,12)
(9"bore:9-600,12) ] |
| Spindle motor |
10HP (Opt.15HP) |
15HP (Opt.20HP) |
| THREADS |
| INCH-(kinds), range, TPI |
(45) 2-56
[Opt. (36) 2-28] |
(36) 2-28 |
| METRIC-(kinds), range, mm |
(70) 0.4-14
[Opt. (65) 0.8-14] |
(65) 0.8-14 |
| TAILSTOCK |
| Quill dia. / Center taper / Travel |
80mm (3.1")
/ MT5 / 230mm (9") |
| MISCELLANEOUS |
| Bed width |
400mm (15.7") [ Opt. 460mm (18") ] |
| Weight cap. between centers, kgs |
2800 |
| Compound rest / Cross slide travel |
230mm (9") /
340mm (13.3") |
| Steady / Follow rest capacity (Opt.) |
100-380mm (3.9"-14.9")
/ 35-125mm (1.3"- 4.9") |
| Taper attachment stroke (Opt.) |
400 (15.7") |
| Net weight, kgs(1500mm) |
3050 |
3150 |
| Net weight, kgs(2000mm) |
3250 |
3300 |
| Net weight, kgs(3000mm) |
3850 |
3900 |
| Net weight, kgs(4000mm) |
4400 |
4500 |
| Net weight, kgs(5000mm) |
5100 |
5200 |
| ‧The specifications are subject to change without prior notice. |
|
| MODEL |
TK770 |
TK840 |
| CAPACITY |
| Swing over bed |
770mm (30.3") |
840mm (33") |
| Swing over cross slide |
560mm (22") |
630mm (24.8") |
| Swing over gap |
990mm (38.9") |
1060mm (41.7") |
| Gap width from spindle nose |
460mm (18.1") |
| Between centers |
1500mm (59") , 2000mm (78") , 3000mm (118")
4000mm (157") , 5000mm (196") |
| HEADSTOCK |
| Spindle bore,dia |
Ø104mm (4")
[Opt.Ø156mm (6") A2-11,Ø230mm (9") A2-15] |
| Spindle nose (Camlock) |
D1-11orA-11 |
| Spindle speeds, RPM, steps |
15-1000,12
[Opt. (6"bore:13-800,12) ,(9"bore:9-600,12) ]
|
| Spindle motor |
15HP (Opt.20HP) |
| THREADS |
| INCH-(kinds), range, TPI |
(36)
2-28 |
| METRIC-(kinds), range, mm |
(65)
0.8-14 |
| TAILSTOCK |
| Quill dia. / Center taper / Travel |
80mm (3.1")
/ MT5 / 230mm (9") |
| MISCELLANEOUS |
| Bed width |
400mm (15.7") [ Opt. 460mm (18") ] |
| Weight cap. between centers, kgs |
2800 |
| Compound rest / Cross slide travel |
230mm (9") /
340mm (13.3") |
| Steady / Follow rest capacity (Opt.) |
100-380mm (3.9"-14.9")
/ 35-125mm (1.3"-4.9") |
| Taper attachment stroke (Opt.) |
400 (15.7") |
| Net weight, kgs(1500mm) |
3300 |
3400 |
| Net weight, kgs(2000mm) |
3450 |
3600 |
| Net weight, kgs(3000mm) |
4050 |
4200 |
| Net weight, kgs(4000mm) |
4650 |
4850 |
| Net weight, kgs(5000mm) |
5350 |
5500 |
| ‧The specifications are subject to change without prior notice. |
|
STANDARD ACCESSORIES: |
1. |
4-way toolpost with T slot |
2. |
Longitudinal rapid traverse |
3. |
Longitudinal bar with travel dogs (For carriage stop) |
4. |
Sleeve & centers |
5. |
Coolant system |
6. |
Quartz work light |
7. |
Thread chasing dial |
8. |
Tool box with tools |
9. |
Manual |
|
OPTIONS: |
| 1. |
3-jaw chuck |
| 2. |
4-jaw chuck |
| 3. |
Steady rest |
| 4. |
Follow rest |
| 5. |
Face plate |
| 6. |
Rear tool post |
| 7. |
Micrometer carriage stop |
| 8. |
4-position carriage stop (Turret type) |
| 9. |
Rotating center, MT5 |
| 10. |
Taper attachment (±10 degree, stroke 400mm) |
| 11. |
Quick change tool post |
| 12. |
CE mark |
|
|
|
|
 |
 |
