 |
|
 |
 |
 Heavy Duty Precision Lathe |
FEATURES: |
| 1. |
Heavy duty casting with FC30 material for
headstock. |
| 2. |
SKF bearing set for heavy cutting on main spindle. |
| 3. |
Headstock gears with SCM21 material, precision ground
and hardened. |
| 4. |
Dual gear box, easier for lnch/Metric threading. |
| 5. |
Magnetic brake system for spindle power. |
| 6. |
The bedway is very massive designed with FC30 material,
special heat-treat ment hardened and precision ground.
The additional third bedway is an specialty for heavy
cutting. |
| 7. |
Fully auto lubricating system for sliddways. |
| 8. |
Tailstock body is heat-treated for heavy cutting and
longer life-time. |
|
| MODEL |
TK 960 |
TK 1060 |
TK 1200 |
| CAPACITY |
| Swing over bed |
960mm (37.7") |
1060mm (41.7") |
1200mm (47.2") |
| Swing over corss slide |
650mm (25.5") |
750mm (29.5") |
890mm (35") |
| Swing over gap |
1510mm (59.4") |
1610mm (63.3") |
1750mm (68.8") |
| Center height |
480mm (18.8") |
530mm (20.8") |
600mm (23.6") |
| Width of gap |
570mm (22.4") |
| Bed width / Auxiliary guide |
560mm (22") / 600mm (25.9") |
| Between centers |
2M, 3M, 4M, 5M, 6M, 7M,8M,9M |
| HEADSTOCK |
| Spindle bore,dia. |
156mm (6")
[OPT.230mm (9") ] |
156mm (6")
[Opt.230mm (9") ,
310mm (12" )
360mm (14") ,
510mm (20") ] |
| Spindle nose |
A2-11 (Opt.A2-15) |
A2-11
(Opt.A2-15,A2-20,A2-20,A2-28) |
| Spindle speeds(12steps) |
9-600 (Opt.6-400) |
9-600
(Opt.6-400,4-300,3-250,2-150) |
| Main spindle motor |
20HP (Opt.25HP,30HP) |
| FEED & THREADS |
| Cross travel |
540mm (21.2") |
| Cross feeds |
0.065-0.96 (48kinds) |
| Longitudinal feeds |
0.13-1.92 (48kinds) |
| Lead screw diameter |
50mm (1.9") x 2TPI |
| Threading range, Metric |
2-30mm / Pitch (44kinds) |
| Threading range, Inch |
1-16TPI (42kinds) |
| Module pitch threads |
1-15M (32kinds) |
| DP. Pitch threads |
2-30P (48kinds) |
| Compound rest travel |
300mm (11.8") |
| Tool size |
40 x40mm (1.5" x1.5") |
| Rapid motor |
1/2HP |
| Coolant pump |
1/4HP |
| TAILSTOCK |
| Tailstock spindle |
Ø125mm (4.92") |
| Tailstock spindle taper |
MT6 |
| Quill travel |
300mm (11.8") |
| Net Weight |
6100kgs (2M), 7450kgs (3M) 8550kgs (4M),
9650kgs (5M), 10750kgs (6M)11850kgs (7M),
12950kgs (8M),14050kgs (9M) |
| ‧The specifications are subject to change without prior notice. |
|
| MODEL |
TK 1200N |
TK 1320N |
TK 1580N |
| CAPACITY |
| Swing over bed |
1200mm (47.2") |
1320mm (51.9"") |
1580mm (62.2") |
| Swing over corss slide |
840mm (33") |
990mm (38.9") |
1250mm (49.2") |
| Swing over gap |
1720mm (67.7") |
1870mm (73.6") |
2130mm (83.8") |
| Center height |
585mm (23") |
660mm 25.9 ") |
790mm (31.1") |
| Width of gap |
600mm (236") |
| Bed width / Auxiliary guide |
800mm (31.4") / 1000mm (39.9") |
| Between centers |
2M, 3M, 4M, 5M, 6M, 7M,8M,9M |
| HEADSTOCK |
| Spindle bore,dia. |
230mm (9 ")
[Opt.310mm (12") ,
360mm (14" ) , 535mm (21") ] |
| Spindle nose |
A2-15
(Opt.A2-20,A2-28) |
| Spindle speeds(12steps) |
6-400
(Opt.4-280,3-200) |
| Main spindle motor |
30HP (Opt.40HP) |
| FEED & THREADS |
| Cross travel |
800mm (31.4") |
| Cross feeds |
0.065-0.96 (48kinds) |
| Longitudinal feeds |
0.13-1.92 (48kinds) |
| Lead screw diameter |
50mm (1.9") x 2TPI |
| Threading range, Metric |
2-30mm / Pitch (48kinds) |
| Threading range, Inch |
1-15TPI (48kinds) |
| Module pitch threads |
1-15M (32kinds) |
| DP. Pitch threads |
2-30P (48kinds) |
| Compound rest travel |
350mm (13.7") |
| Tool size |
40 x40mm (1.5" x1.5") |
| Rapid motor |
1/2HP |
| Coolant pump |
1/4HP |
| TAILSTOCK |
| Tailstock spindle |
Ø200mm (7.87") |
| Tailstock spindle taper |
MT6 |
| Quill travel |
300mm (11.8") |
| Net Weight |
|
| ‧The specifications are subject to change without prior notice. |
|
| STANDARD ACCESSORIES: |
1. |
Inch/Metric dual gear box |
2. |
Coolant system |
3. |
Quartz work light |
4. |
Sleeve & Centers(MT5, MT6 one of each) |
5. |
Tool box with maintenance tools |
6. |
Manual |
|
OPTIONS: |
| 1. |
3-jaw chuck |
| 2. |
4-jaw chuck |
| 3. |
Steady rest |
| 4. |
Follow rest |
| 5. |
Face plate |
| 6. |
Rear toolpost |
| 7. |
Micrometer carriage stop |
| 8. |
Pneumatic rapid threading device |
| 9. |
Rotating center MT5 |
| 10. |
Taper attachment (±10 degree,stroke 500mm ) |
| 11. |
Quick change toolpost |
| 12. |
CE mark |
| 13. |
6 way rapid traverse |
|
|
|
|
 |
 |
