About Us　‧　Contact Us　‧ 　e-Catalogue　‧ 　News　 ‧　Home　 ‧繁體中文
 

--------------------------------------- Economic Type CNC Lathe
MODEL DESCRIPTION TNC-04N TNC-06N TNC-08N
Capacity Swing over bed 400mm 400mm 400mm
Swing over saddle 160mm 160mm 200mm
Distance between centers - - 400mm
Cutting diameter / length Ø60 / 120mm Ø130 / 160mm Ø200 / 300mm
Hydraulic chuck 4" (opt) 6" 8"
Bar capacity Ø26mm Ø42mm Ø52mm
Bar width 220mm 220mm 320mm
Bed slant angle - 25° 20°
Spindle Spindle nose Ø85mm A2-5 A2-6
Spindle hole 38mm 50mm 60mm
Spindle speed 100-6000 rpm 100-6000 rpm 100-4000 rpm
Spindle motor 2.2kw / 3HP 5.5kw /
7.5HP (servo)

7.5kw /
10HP (servo)

Spindle OD diameter Ø65mm Ø85mm Ø100mm
Turret
(Option) 		Turret type Hydraulic Hydraulic Hydraulic
Tool station 8 8 8
Tool holder size Ø20mm,16mm Ø25mm,20mm Ø32mm,25mm
Travel X Travel 230mm 230mm 320mm
Y Travel 300mm 300mm 420mm
Rapid travel 16M / Min. 16M / Min. 12M / Min.
Tailstock Tailstock travel - - 240 mm
Quill taper - - 100 mm
Tailstock diameter - - Ø 53mm
Quill travel - - MT4
Motor Servo motor (X) 1HP (HA 40) 1HP (HA 40) 1HP (HA 40)
Servo motor (Z) 1HP (HA 40) 1HP (HA 40) 2HP (HA 80)
Coolant pump 1/4 HP 1/4 HP 1/4 HP
Hydraulic motor 1 HP 1 HP 1 HP
Weight Kgs 1650 1700 2650
Dimension L x W x H mm 2240x1260x1830 2240x1260x1830 2900x1500x1630
　
MODEL DESCRIPTION TNC-10 TNC-10A TNC-15
Capacity Swing over bed Ø400mm(15.75") Ø400mm(15.75") Ø410mm(16.14")
Chuck size Ø169mm(6.65") Ø210mm(8") Ø254mm(10")
Spindle Spindle nose, ASA A2-5 A2-6 A2-8
Spindle bearing diameter Ø90mm(3.5") Ø100mm(4") Ø130mm(5.12")
Spindle bore Ø56mm(2.2") Ø62mm(2.44") Ø87mm(3.4")
Bar capacity Ø45mm(1.77") Ø52mm(2") Ø75mm(2.95")
Spindle taper MT 6 1:20

1:20
Spindle speed range 40-4000rpm 40-4000rpm 32-3200rpm
Slides Longitudinal carriage travel (Z) 340mm(13.4") 340mm(13.4") 340mm(13.4")
Cross slide travel (x) 450mm(17.7") 450mm(17.7") 450mm(17.7")
X axis rapid traverse 15M/min(591") 15M/min(591") 15M/min(591")
Z axis rapid traverse 15M/min(591") 15M/min(591") 15M/min(591")
Bed Width 560min(22") 560min(22") 560min(22")
Slant angle 45° 45° 45°
Motor Spindle AC 11/15 kw AC 9/11 kw ℓ 22ip AC 11/15 kw
X Axis AC servo AC 1.8kw AC 1.8kw AC 1.6kw
Z Axis AC servo AC 1.8kw AC 1.8kw AC 3.0kw
Hydraulic pump AC 0.75kw AC 0.75kw AC 0.75kw
Coolant pump AC 0.375kw AC 0.375kw AC 0.375kw
Lub. pump 25w 25w 25w
Miscellaneous Packing size 2920x1810x2100mm 2920x1810x2100mm 3230x1810x2100mm
Gross whight 3500kgs 3500kgs 3800kgs
　
‧The design & specifications are subject to change without prior notice.
TNC-04N
STANDARD ACCESSORIES:
1. Model 25 collet chuck
2. Tool post & sleeve
3. Auto lubrication, coolant & hydraulic system
4. Sub-plate
5. Work light
6. Mitsubish E-60 controller
7. Spindle inverter motor
OPTIONS:
1. Chip conveyor with bucket
2. 4" 3 Jaw power hollow chuck
3. 8 Stations turret (for Mitsubish, E-60 controller only)
4. Fanuc 0i-Mate instead of Mitsubish E-60 controller
TNC-06N
STANDARD ACCESSORIES:
1. 6" Hollow chuck & cylinder
2. Toolpost & sleeve
3. Auto lubrication, coolant & hydraulic system
4. Sub-plate
5. Work light
6. Mitsubish M64 controller
OPTIONS:
1. Spindle orientation (one point)
2. Spindle orientation with index 5°
3. ARO milling sleeves
4. Parts catcher
5. Collet chuck
6. Collets for collet chuck (each size)
7. Auto door
8. Chuck cleaner
9. Soft jaw
10. Bar feeder (Model:DH-65, Ø5-65mm, L:1.2M)
11. Additional sub-plate
12. Chip conveyor
13. 8 Stations turret (Ø25mm, 20mm)
14. CE mark
15. Fanuc 0i-Mate instead of Mitsubishi M64
TNC-08N
STANDARD ACCESSORIES:
1. 8" Hollow chuck & cylinder
2. Toolpost & sleeve
3. Auto lubrication, coolant & hydraulic system
4. Sub-plate
5. Work light
6. Mitsubish M64 controller
7. Chip conveyor
OPTIONS:
1. 10" Hollow chuck & cylinder
(Spindle bore 86mm, bar capacity Ø75mm)
2. Spindle orientation (one point)
3. Spindle orientation with index 15°
4. ARO milling attachment
5. Milling sleeves
6. Parts catcher
7. Collet chuck
8. Collet for collet chuck (each size)
9. Auto door
10. Chuck cleaner
11. Soft jaw
12. Bar feeder (Model: DH-65, Ø5-65mm, L:1.2M)
13. Additional sub-plate
14. Chip conveyor
15. 8 Stations turret (Ø 32mm , 25mm)
16. Hydraulic tailstock
17. Tool presetter
18. CE mark
19. Fanuc 0i-Mate instead of Mitsubishi M64

TNC-10
STANDARD ACCESSORIES:
1. 6"/8"/10" Dia. hydraulic hollow chuck with cylinder
2. Tool holder type A.B.C. (one of each)
3. Center sleeve, Ø8, 10, 12, 16, 20, 25, MT 2 & MT 3 (one of each)
4. Sub-plate
5. Coolant system
6. Automatic lubrication system
7. Work light
8. Chip conveyor
OPTIONS:
1. Spindle Orientation Indexing(15°)
2. Chuck air cleaner
3. Bar feeder
4. Parts catcher
5. Bar puller
6. Auto door
7. Additional type A, B & C tool holders & sleeves
8. Additional Sub-plate
9. Milling attachment
10. V8 turret
11. Collet chuck & collets
TNC-10A
STANDARD ACCESSORIES:
1. 6"/8"/10" Dia. hydraulic hollow chuck with cylinder
2. Tool holder type A.B.C. (one of each)
3. Center sleeve, Ø8, 10, 12, 16, 20, 25, MT 2 & MT 3 (one of each)
4. Sub-plate
5. Coolant system
6. Automatic lubrication system
7. Work light
8. Chip conveyor
OPTIONS:
1. Spindle Orientation Indexing(15°)
2. Chuck air cleaner
3. Bar feeder
4. Parts catcher
5. Bar puller
6. Auto door
7. Additional type A, B & C tool holders & sleeves
8. Additional Sub-plate
9. Milling attachment
10. V8 turret
11. Collet chuck & collets
TNC-15
STANDARD ACCESSORIES:
1. 6"/8"/10" Dia. hydraulic hollow chuck with cylinder
2. Tool holder type A.B.C. (one of each)
3. Center sleeve, Ø8, 10, 12, 16, 20, 25, MT 2 & MT 3 (one of each)
4. Sub-plate
5. Coolant system
6. Automatic lubrication system
7. Work light
8. Chip conveyor
OPTIONS:
1. Spindle Orientation Indexing(15°)
2. Chuck air cleaner
3. Bar feeder
4. Parts catcher
5. Bar puller
6. Auto door
7. Additional type A, B & C tool holders & sleeves
8. Additional Sub-plate
9. Milling attachment
10. V8 turret
11. Collet chuck & collets
 

Copyright©CNC-TAKANG CO., LTD. Hosted by
Machinetools Directory , Plastic and Rubber Machine Directory.