 ---------------------------------------Turret Type CNC Lathe |
|
| FEATURES: |
| 1. |
High rigidity and heavy cutting |
| 2. |
30 degree slant bed structure are easily for chip removals |
| 3. |
Easy operation |
| 4. |
Enclosed electrical cabinet |
| 5. |
Heat exchanger to maintain low temperature in electrical
cabinet |
| 6. |
Programmable tailstock |
| 7. |
Separated coolant tank |
|
|
| MODEL |
DESCRIPTION |
TNC-20A / 20 AL |
| Capacity |
Swing over bed |
Ø460mm (18") |
| Swing over saddle |
Ø280mm (11") |
| Distance between center |
460/660mm (18/26") |
| Cutting diameter |
Ø220mm (8") |
| Hydraulic chuck |
Ø210mm (8") |
| Bar diameter |
Ø52mm (2")
(OPT Ø65 (2.6")) |
| Bed width |
360mm (14") |
| Bed slant angle |
30 degree |
| Spindle |
Spindle nose |
A2-6 |
| Spindle hole |
Ø62mm (2.44") |
| Spindle taper |
1 / 20 |
| Spindle speed |
40-4000 rpm |
| Spindle motor |
FANUC β18ip
(9 / 11kw ) |
| Spindle dia. (OD) |
Ø100mm (4") |
| Turret |
Turret
type |
Hydraulic turret (OPT SERVO) |
| Tool
station & size (OD) |
8, 25x25mm
(1x1") |
| X travel
|
150mm
(6") |
| Z travel
|
640mm
(25.2") |
| Rapid traverse |
X: 15M/min(591") / Z: 15M/min(591") |
| Tool holder dia. |
Ø32mm (1.25") |
| Tailstock |
Tailstock stroke |
240 / 480 mm (9.5 / 19 ") |
| Quill stroke |
80mm (3") |
| Tailstock diameter |
Ø70mm (2.75") |
| Quill taper |
MT4 |
| Motor |
Servo motor (X) |
1.8 kw |
| Servo motor (Z) |
1.8 kw |
| Coolant pump |
0.37 HP |
| Hydraulic motor |
1.5 HP |
| Power requirement |
25 KVA |
| Miscellaneous |
Packing size |
3110 / 3350
x 2000 x 2500 mm |
| Gross weight |
4000 / 4600 kgs |
| ‧The design & specifications are subject to change without prior notice. |
|
| STANDARD ACCESSORIES: |
| 1. |
Coolant system |
| 2. |
Chip conveyor |
| 3. |
Hydraulic hollow chuck |
| 4. |
Programmable hydraulic tailstock |
| 5. |
Tool holders (For direct type disk only) |
| 6. |
Hydraulic system |
| 7. |
Operation manual |
|
| OPTIONS: |
| 1. |
Bar feeder |
| 2. |
Parts catcher |
| 3. |
C axis / spindel index with driving tool turret |
| 4. |
Tool presetter |
| 5. |
Extra tool holder |
| 6. |
Sub spindle |
| 7. |
VDI Tool holders |
| 8. |
CE mark |
|
|
