CNC TAKANG-Heavy Duty Lathe- CNC-TAKANG CO., LTD.

MODEL	DESCRIPTION	TNC-460H / TNC-460HL
Capacity	Swing over bed	460mm (18")
	Swing over cross slide	240mm (8.7")
	Center height	230mm (9")
	Distance between center	1000mm (40"),1500mm (60")
	Bed width	350mm (13.8")
Spindle	Soindle nose Spindle speed (4 steps)	A2-6
	Soindle nose Spindle speed (4 steps)	40-4000 rpm
	Spindle bore	54mm (2.1")
	Chuck size	8"
Turret	Longitudinal travel (Z axis)	895mm(35.2"),1415mm(55.7")
	Crosslide travel (X axis)	280mm (11")
	Topsilde width	115mm (4.5")
	Size of toolpost shank	25mmx25mm (1"x1")
	X axis rapid travel	5M / min. (200ipm)
	Z axis rapid travel	10M / min. (400ipm)
Tailstock	Quill diameter	65mm (2.5")
	Quill travel	150mm (6")
	Quill taper	MT4
Motor	Spindle motor	7.5HP/10HP(OPT)
	Drives (X,Z)	AC SERVO
	Range of feeds in manual mode	0.01-500 m/rev. (0.0004-19.68 in/rev.)
	Coolant pump motor	1/8 HP
	Machine Weight	2500kgs(5500lbs), 2750kgs(6050lbs)

‧The specifications are subject to change without prior notice.

STANDARD ACCESSORIES:
1.	Auto lubrication system
2.	Coolant system
3.	8" hydraulic hollow chuck & chlinder (Only for TNC460H series)
4.	H4 electrical tool post (Only for TNC460H series)
5.	4 stations manual toolpost
6.	Rear splash guard with two slide front doors
7.	RS-232 port
8.	Work light
9.	Adapter sleeve
10.	Two dead center
11.	Leveling bolts & pads
12.	Tool box with tools
13.	Accuracy test record
14.	Operation & service manual

OPTIONS:
1.	Larger spindle motor
2.	Bigger spindle bore
3.	3-Jaw chuck (OD)
4.	4-jaw chuck (OD)
5.	Hydraulic chuck (OD, Throungh hole)
6.	Face plate
7.	Steady rest
8.	Follow rest
9.	Quick change tool post
10.	4 stations electrical turret
11.	8 stations hydraulic turret with direct type disk
12.	Rotation center
13.	Hydraulic tailstock
14.	Chip conveyor
15.	Transformer (power supply except 220V)
16.	CE mark