 |
|
 |
 |
 |
|
| 1. |
Slant bed with wider bedways, provide high accuracy
and high performance |
| 2. |
Precision ballscrews in each axis, supported by angular
roller bearing |
| 3. |
High position accuracy and repeatability |
| 4. |
Lower thermal deformation and vibration |
| 5. |
Forced lubrication system assure longer life time |
| 6. |
Automatic chip conveyor for easy chip sweep |
| 7. |
Guideways are used by linear motion guideway |
|
|
| MODEL |
DESCRIPTION |
TNC-N200 |
TNC-N200L |
TNC-N300 |
| Capacity |
Swing
over bed |
Ø 600mm (23.62") |
Ø 630mm (24.8") |
Max.
machining diameter |
Ø 330mm (13") |
Ø 330mm (12") |
Ø 442mm (17.4") |
Max.
machining length |
430mm (16.92") |
690mm (27.16") |
700mm (27.56") |
| Spindle |
Spindle
nose |
A2-6 |
A2-8 |
Spindle
bore |
Ø 61mm (2.4")
OPT: Ø 77mm (3.03)" |
Ø 90mm (3.54") |
Bar
capacity |
Ø 51mm (2.0")
OPT: Ø 65mm (2.56)" |
Ø 75mm (2.95") |
Spindle
speed |
40-4000RPM (8") |
35-3500RPM (10");
OPT:25-2500rpm (12") |
Living tools speed |
25-4000rpm |
32-3200rpm |
Spindle taper |
1:20 |
1:20 |
Hydraulic chuck |
Ø 210mm (8") |
254mm (10");
OPT: Ø 304mm (12") |
| Turret |
Tool station |
Hyd 12-240 OPT:V12 SERVO 12-240 |
O.D. tooling |
 20×20mm
OPT: 25×25mm |
25×25mm(1") |
I.D. tooling |
Ø 32mm (1.25")
OPT: Ø 40mm (1.57") |
Ø 40mm (1.5") |
Z travel |
460mm (18.11") |
743mm (29.25") |
720mm (28.35") |
X travel |
180mm (7.08") |
250mm (9.84") |
Rapid travel (X, Z-axis) |
30M/min (1181ipm) |
Cutting feed rate (Both-axis) |
0.001-500mm/rev |
Dia. of ball screw (Z-axis) |
Ø 36mm (1.42") P10 |
Dia. of ball screw (X-axis) |
Ø 32mm (1.26") P10 |
| Motor |
Spindle motor |
α22iP AC 11/15kw |
α30iP AC 15/18.5kw |
Hydraulic motor |
1.5kw (2HP) |
Coolant pump |
750w (1HP) |
AC servo motor (X) |
α8iB AC 1.6kw |
α12iB AC 3.0kw |
AC servo motor (Z) |
α8i 1.6kw |
| Tailstock |
Quill diameter |
Ø 75mm (2.95") |
Ø 90mm (3.54") |
Quill stroke |
80mm (3.15") |
100mm (3.94") |
Quill taper |
MT No.4 |
MT No.5 |
Tailstock stroke |
420mm (16.53") |
668mm (26.29") |
625mm (24.6") |
| Tank Capacity |
Hydraulic tank |
60Liter |
Coolant tank |
100Liter |
| Miscellaneous |
Packing size |
360×205×226cm
(142×81×89") |
400×205×226cm
(157×81×89") |
426×217×227cm
(168×85×89") |
G weight |
5500kgs |
6400kgs |
6500kgs |
| ‧The specifications are subject to change without prior notice. |
|
| STANDARD ACCESSORIES: |
| 1. |
FANUC 0iT controller |
| 2. |
FANUC two years guaranty (Europe area only) |
| 3. |
8" Hydraulic hollow chuck and cylinder on TNC-N200 and TNC-N200L 10" Hydraulic hollow chuck and cylinder on TNC-N300 |
| 4. |
12 station hydraulic turret with tool disk |
| 5. |
Auto coolant (internal with open flow), hydraulic & lubrication system |
| 6. |
Work light |
| 7. |
Chip conveyor |
| 8. |
Tool box with tools & manuals |
|
| OPTIONS: |
| 1. |
Extra bar capacity, hydraulic chuck & motor |
| 2. |
Collet chuck |
| 3. |
Soft jaws |
| 4. |
Chuck air cleaner |
| 5. |
Driving tool turret with C axis / spindle indexing |
| 6. |
Driving tool turret with Y axis [stroke ±40mm, X axis motor α22i (4kw),
Z axis motor α12i (3kw)] |
| 7. |
VDI driving tool holder |
| 8. |
Tool presetter (Auto / Semi-auto) |
| 9. |
Auto door |
| 10. |
Parts catcher |
| 11. |
Bar feeder |
| 12. |
Software for bar feeder (with relay) |
| 13. |
Hydrodynamic auto bar feeder |
| 14. |
Transformer (power supply except 200V) |
| 15. |
CE mark |
|
| ------------------------------------------------------------------------------ |
| ITEMS |
MODEL |
TNC-N200DS |
TNC-N200DS-B |
| Capacity |
Swing
over bed |
600mm (23.12") |
650mm (25.59") |
Max.
machining diameter |
245mm (9.64") |
490mm (19.29") |
Max.
machining length |
260mm (10.23") |
500mm (19.68") |
| Main Spindle(L) |
Spindle
nose |
A2-5 |
A2-6 |
Spindle
bore |
56mm (2.2") |
61mm (2.4") |
Bar
capacity |
45mm (1.7") |
51mm (2") |
Spindle
bearing (ID) |
90mm (3.5") |
100mm (4") |
Hydraulic
chuck |
169mm (6") |
210mm (8") |
Speed
range |
60-6000 rpm |
42-4200 rpm |
| Sub Spindle (R) |
Spindle
nose |
A2-5 |
Spindle
bore |
56mm (2.2") |
62mm (2.44") |
Bar
capacity |
45mm (1.7") |
52mm (2.05") |
Spindle
bearing (ID) |
90mm (3.54") |
Hydraulic
chuck |
169mm (6") |
Speed
range |
60-6000rpm |
E
stroke |
260mm (10.23") |
500mm (19.68") |
E
Axis rapid travel |
20M / min. |
| Turret |
Tool
number |
12 STATIONS (SERVO TURRET) |
X
axis stroke: X1 |
165mm (6.5") |
280mm (11.02") |
Z
axis stroke: Z1
|
310mm (12.2") |
560mm (22.05") |
Rapid
travel: X1, X2 |
20M (787") / min |
Z1,
Z2 |
20M (787") / min |
Tool
change time |
0.2 sec. |
Tool
holder |
VDI 30, 20mm |
Max.
boring bar |
32mm (1.25") |
| Motor |
Main
spindle motor |
α12iP, 5.5 / 7.5kw |
α18iP, 9 / 11kw |
Sub
spindle motor |
Fanuc α 6i, 5.5 / 7.5kw |
X
axis servo motor, X1 |
α8iB, 1.6kw |
X2 |
|
|
Z
axis servo motor, Z1 |
α 8i(1.6kw) |
Z2 |
|
Hydraulic
oil pump |
1.5kw (2HP) |
Coolant
pump |
750w (1HP) |
| Miscellaneous |
Packing size |
372x205x224cm
(146.5x80.7x88.2") |
402x206x230cm
(158.3x81.1x90.6") |
G weight |
5830kgs |
7030kgs |
| ‧The specifications are subject to change without prior notice. |
|
| ITEMS |
MODEL |
TNC-N200DST |
TNC-N200DST-B |
| Capacity |
Swing
over bed |
620mm (24.41") |
620mm (24.41") |
Max.
machining diameter |
440mm (17.32") |
440mm (17.32") |
Max.
machining length |
310mm (12.20") |
290mm (11.41") |
| Main Spindle(L) |
Spindle
nose |
A2-5 |
A2-6 |
Spindle
bore |
56mm (2.2") |
61mm (2.4") |
Bar
capacity |
45mm (1.7") |
51mm (2") |
Spindle
bearing (ID) |
90mm (3.5") |
100mm (4") |
Hydraulic
chuck |
169mm (6") |
210mm (8") |
Speed
range |
60-6000 rpm |
42-4200 rpm |
| Sub Spindle (R) |
Spindle
nose |
A2-5 |
Spindle
bore |
56mm (2.2") |
Bar
capacity |
45mm (1.7") |
Spindle
bearing (ID) |
90mm (3.54") |
Hydraulic
chuck |
169mm (6") |
Speed
range |
60-6000rpm |
E
stroke |
510mm (20") |
E
Axis rapid travel |
20M / min. |
| Turret |
Tool
number |
L: 12, R:12 (SERVO TURRET) |
X
axis stroke: X1 |
L: 245mm (9.64") |
L: 245mm (9.64") |
X2 |
R: 245mm (9.64") |
R: 245mm (9.64") |
Z
axis stroke: Z1 |
L: 342mm (13.64") |
L: 342mm (13.64") |
Z2 |
R: 342mm (13.64") |
R: 342mm (13.64") |
Rapid
travel: X1, X2 |
20M (787") / min |
Z1,
Z2 |
20M (787") / min |
Tool
change time |
L & R: 0.2 sec. |
Tool
holder |
L & R: VDI 30, 20mm |
Max.
boring bar |
32mm (1.25") |
| Motor |
Main
spindle motor |
α12iP, 5.5 / 7.5kw |
α18iP, 9 / 11kw |
Sub
spindle motor |
Fanuc α 6i, 5.5 / 7.5kw |
X
axis servo motor, X1 |
α8iB, 1.6kw |
α8iB, 1.6kw |
X2 |
α8iB, 1.6kw |
α8iB, 1.6kw |
Z
axis servo motor, Z1 |
α 8i (1.6kw) |
Z2 |
α 8i (1.6kw) |
Hydraulic
oil pump |
1.5kw (2HP) |
Coolant
pump |
750w (1HP) |
| Miscellaneous |
Packing size |
414x221x255cm
(163x87x100.4") |
428x220x248cm
(168.5x91.7x97.6") |
G weight |
7830kgs |
7880kgs |
| ‧The specifications are subject to change without prior notice. |
|
| STANDARD ACCESSORIES: |
| 1. |
FANUC 0iT controller for DS series, 18iTB controller for DST series |
| 2. |
FANUC two years guaranty (Europe area only) |
| 3. |
Hydraulic hollow chuck and cylinder on man spindle, 6" chuck on sub-spindle |
| 4. |
12 stations turret with tool disk |
| 5. |
Auto coolant (internal with open flow), hydraulic & lubrication system |
| 6. |
Work light |
| 7. |
Chip conveyor |
| 8. |
Tool box with tools & manuals |
|
| OPTIONS: |
| 1. |
Extra bar capacity, hydraulic chuck & motor |
| 2. |
Collet chuck |
| 3. |
Soft jaws |
| 4. |
Chuck air cleaner |
| 5. |
Driving tool turret with C axis / spindle indexing |
| 6. |
Driving tool turret with Y axis [stroke ±40mm, X axis motor α22i (4kw),
Z axis motor α12i (3kw)] |
| 7. |
VDI driving tool holder |
| 8. |
Tool presetter (Auto / Semi-auto) |
| 9. |
Auto door |
| 10. |
Parts catcher |
| 11. |
Bar feeder |
| 12. |
Software for bar feeder (with relay) |
| 13. |
Hydrodynamic auto bar feeder |
| 14. |
Transformer (power supply except 200V) |
| 15. |
CE mark |
|
|
|
 |
 |
