 |
|
 |
 |
 ------------------Slant
Bed / VS Series |
|
| FEATURES: |
| 1. |
Powerful spindle motor. High torque output at low
speed is excellent for heavy
duty machining. |
| 2. |
Fast tool change in only 1 second. |
| 3. |
Programmable tailstock for convenient operation. |
| 4. |
Independent cooling system for spindle stock ensures
normal temperature at high speed running. |
| 5. |
Optical scale on X, Z-axis ensures high positioning
accuracy. |
|
|
| MODEL |
DESCRIPTION |
TNC-VS 35 |
TNC-VS 40 |
TNC-VS 45 |
| Capacity |
Swing over bed |
890mm (35") |
1020mm (40") |
1145mm (45") |
| Swing over saddle |
740mm (29") |
870mm (34") |
995mm (39") |
| Max. cutting diameter |
890mm (35") |
1020mm (40") |
1145mm (45") |
| Distance between centers |
700mm (28"), 1200mm (47"), 1700mm (67")
2200mm (87"), 3200mm (126"),
4200mm (165"), 5200mm (205") |
| Bed width/Slant angle |
1430mm (53.5") / 60° |
| Carriage bearing on bed way |
950mm (37.4") |
| Width of cross slide |
600mm (23.6") |
| Spindle |
Spindle nose |
| A2-11(6") |
A2-15(9") |
A2-20(12") |
A2-28(16",
21") |
| 20~140 |
16~120 |
14~100 |
10~75 |
| 38~280 |
30~200 |
26~180 |
18~110 |
| 95~550 |
70~420 |
60~350 |
45~250 |
| 200~1200 |
150~700 |
130~450 |
65~350 |
|
| Spindle speeds |
1. range-rpm |
| 2. range-rpm |
| 3. range-rpm |
| 4. range-rpm |
| Spindle bore |
153mm(6") 230mm(9") 255mm(10") 318mm(12.5") 360mm(14.2") 410 mm(16.14") 535mm(21") |
| Spindle step |
Auto 4 steps |
| Spindle internal taper |
1/20 |
| Turret |
Standard tool post |
Direct or VDI Disc |
| No. of tool stations |
12 |
| Tool shank cross section |
32mm x 32mm (1.25") |
| Tool shank diameter max. |
Ø 102mm (4") |
| Travel |
Rapid travel |
X-axis:8 M/min Z-axis:10 M/min |
| X axis travel |
550mm |
| Z axis travel |
750 / 1250 / 1750 / 2250 / 3250 / 4250 / 5250 |
| Ball screw diameter |
X-axis: 50mm (2"), Z-axis: 80mm (3.15") |
| Tailstock |
Quill type |
built-in type, rotating tailstock quill |
| Quill diameter |
235mm (9.25") |
| Quill travel |
200mm (7.87") |
| Inner taper of quill |
MT6 |
| Motor |
Main spindle motor |
37.5/45kw(50/60HP) |
| X-axis servo motor |
5.5kw (7.5HP) |
| Y-axis servo motor |
5.5kw (7.5HP) |
| Hydraulic pump motor |
5.5kw (7.5HP) |
| Coolant pump motor |
0.37kw (0.5HP) |
| Controller |
FANUC 0iTC or 18iT |
| Machine Weight |
750mm center distance |
16500kgs |
17000kgs |
17500kgs |
| Each extra 500mm weight |
2200kgs (4840lbs) |
| ‧The design & specifications are subject to change without prior notice. |
|
| STANDARD ACCESSORIES: |
| 1. |
Oil cooler for headstock |
| 2. |
Programmable tailstock with rotating quill |
| 3. |
Digital read out for X & Z axis |
| 4. |
Auto-lubrication, coolant & hydraulic system |
| 5. |
8 stations power turret |
| 6. |
Chip conveyor |
|
| OPTIONS: |
| 1. |
C axis |
| 2. |
Double turret |
| 3. |
Tool presetter |
| 4. |
Sub spindle |
| 5. |
Hydraulic steady rest |
| 6. |
Manual steady rest |
| 7. |
3-Jaw chuck |
| 8. |
Power chuck |
| 9. |
Finger chuck |
| 10. |
Tool holder |
|
|
|
|
 |
 |
